Lasting safety for generations

New fischer FIS V Plus universal mortar

fischer has launched the market’s first universal injection mortar with an evaluated service life (ETA) of 100 years in concrete with the FIS V Plus. In addition to a long service life, the latest generation of fischer’s universal mortars increases the bond strength in concrete by up to 45 per cent, providing the highest level of safety for an entire century. It also offers an expanded range of applications.

Be it steel structures, consoles, facades, rescue ladders or cable runs – the FIS V Plus allows planners and tradespeople to design and carry out multiple fixings tasks with just one product. The universal mortar can be used for fixings in concrete and all conventional types of masonry. The FIS V Plus is also suitable for post-installed rebar connections, water-filled drill holes and seismic applications in performance categories C1 and C2 or A and B according to the ICC-ESR. The injection mortar is also the safe choice in the event of fire (fire resistance class R120). In comparison to alternative solutions, the FIS V Plus additionally guarantees safety when working with low edge and axial spacing. 

It is simple and easy to use: The FIS V Plus is injected into the cleaned drill hole into which the system component is inserted to fasten the attachment part – such as the FIS A and RG M anchor rods in solid building materials, available in many different diameter versions (M6 to M30 in concrete and M6 to M16 in masonry). Its variable anchoring depths allow it to be adapted to the application and load requirement in concrete. There are also internal threaded anchors for applications in concrete (RG M I) and masonry (FIS E) as well as many other system components. 

fischer dispensers allow quick and easy processing of the two-component injection mortar on a vinyl ester resin basis. Upon activating the dispenser, the two separately stored resin and hardener components are mixed together and activated in the static mixer. Opened cartridges can be reused. The anchor sleeve FIS HK can additionally be used in perforated construction materials. This ensures that the mortar is evenly distributed exactly where it is needed when inserting the anchor rod, guaranteeing low mortar use with an optimum fit in the chambers of the masonry stone. 

A large selection of suitable system components provides a broad range of possible applications. In addition to anchor rods, internal threaded anchors and injection anchor sleeves for fixings in indoor and outdoor concrete, aircrete and masonry, this also includes a wide range of accessories for numerous specialist applications. These include the stand-off installation system Thermax 12 and 16 to install facade insulations practically without thermal bridges, the fischer remedial wall tie VBS 8 for the post-installation needling of double-leaf masonry and the FWS II weather facing reconstruction system for the post-installation securing of triple-layered external wall panels. Together with the fischer concrete-concrete shear connector FCC-H, the FIS V Plus is the fast and efficient system with a building approval for structural renovation. fischer also offers the FRA rebar anchor. This concrete steel bar with a metric connection thread made of stainless steel in sizes M12 – M24 fully utilises the load-bearing capacity of the anchor substrate together with the FIS V Plus and transfers high tensile loads in concrete.

fischer is also expanding its range of injection mortars with the new FIS VW Plus High Speed, which enables quick work progress with its short curing time even in low temperatures. Additionally, there is the FIS VS Plus Low Speed. Its extended working time prevents premature curing even at high temperatures or in particularly deep boreholes. Like the FIS V Plus, the FIS VW Plus High Speed and the FIS VS Plus Low Speed can be used for a wide range of applications and systems in concrete as well as in all conventional types of masonry.


Click here to download the press release.

Image 1:

A cartridge full of variety: Planners and tradespeople can design and implement almost any standard project fastening tasks with the FIS V Plus and the wide range of approved system components.

Images: fischer
Image 2:

The FIS V Plus is suitable for almost any type of application with its multitude of system approvals and suitable accessories. The optimised generation of fischer universal mortars also provides improved load values for applications in concrete with an assessed (ETA) working life of 100 years. 

Images: fischer

Katharina Siegel-Rieck

Press Relations Officer
fischer fixing systems,
fischer Electronic Solutions